Matted carpet is a big problem for high traffic areas of your home. It can be difficult to keep up with the cleanup and maintenance which can lead to health concerns and an unsightly appearance.
But you don’t have to worry about matted carpet anymore because there is a new solution to your problems!
How to Fix Matted Carpet in High Traffic Areas
- Use a Carpet Rake to Fluff-up your Carpet
One way to get rid of a pit of carpet in the high traffic areas is using a car carpet rake. This tool can easily rake up your carpet and remove the clumps. You can also use it to vacuum up the mess from your old carpet. To prevent a mess in the first place, you should rent a carpet sweeper at an affordable price
You can use a carpet rake to remove the dirt and dust from your carpet, making it look much nicer. This is a must if you have high-traffic areas that are constantly walked on.
2. Using Moisture
If the furniture is stuck in that one spot, you can use moisture to loosen some fibers by grabbing an ice cube.
Melt the ice cube with heat, or heat it up quickly with a hairdryer. Scrub the area carefully and straighten any carpet fibers as you go.
Use lukewarm water to soak the area, then use a nylon brush or fingers to smooth the fibers.
You can try adding equal parts vinegar and water in a spray bottle to help revitalize your carpet. It will also reduce any unwanted odors it’s giving off.
Spray a vinegar solution here and there to remove pet hair.
To remove matted carpets, you can try using baking soda and vinegar. This home remedy both loosens the carpet’s fibers and cleans them so it may be worth a shot for those who are unable to use a vacuum cleaner.
Put baking soda on the carpet where it is soiled, and scrub it with a stiff brush. Afterward, let the baking poop sit for 16 hours before you vacuum.
After you vacuum your carpet and dry it, apply a mixture of equal parts vinegar and water. Brush the carpet until there’s a significant amount of foam, and let it sit for about 10 minutes. Afterward, apply baking soda to absorb the liquid from the vinegar and mix well
3. Vacuum the Matted Carpet Thoroughly
If you have a room in your house that’s exceptionally high traffic, there’s a good chance that your floor is getting a little worn down.
It might be due to kids, pets, or just because it takes so much activity in one area for the floor to get worn.
Either way, there are ways to fix this problem with ease. One easy solution is to use a vacuum cleaner and vacuum the entire floor thoroughly.
Another solution is to use a mop on the carpets in the affected area and add some distilled white vinegar along with water and clean the floor using an old towel.
If you don’t have a good carpet cleaning machine, I totally recommend the BISSELL Turboclean Powerbrush
4. Use Clothes Iron to Refresh the Matted Carpet
A clothes iron can be a perfect solution for those of you who have experienced matted carpet in high traffic areas.
The clothes iron is heated up to the right temperature and will gently remove any residue that has been left on the carpet fibers. After using the clothes iron, use a vacuum cleaner to remove loose debris.
FAQ On: How to Fix Matted Carpet in High Traffic Areas
Many people have matted carpets in high traffic areas, such as around a child’s bedroom or bathroom.
The carpet becomes stuck to the floor, and the only way to remove the carpet is with a lot of work and possibly some tears.
To fix this, you will need an industrial-grade vacuum cleaner. Plug it into an outlet, and then turn it on at low speed.
Slowly move the vacuum over the affected area, pulling up the debris and pushing it into the machine’s housing. You can also use a steam iron or hair straightener for faster results.
High-traffic areas often have a lot of traffic, so the carpet may become split from all the people walking around.
The best way to fix this is to find something on the ground that you can build up in order to block out the old padding and make it look fluffed. A good example would be a metal tray or an old bread loaf.
The first step is to take a mop that’s soaked in water and wring it out. The wet mop should then be used to clean up the floor.
After the floor has dried, it’s best to use an attachment for your vacuum cleaner that can reach the bottom of your carpet pile.
Then, you can use a broom or dustpan to pick up all the loose dirt from the floor.
The carpet needs to be cleaned often to keep it looking fresh and new. This will require removing the old dirt on the surface, but there is a way that people can revive a thick pile of carpet in high-traffic areas.
This can be done by using a vacuum cleaner with low suction power. Some people use a wet sponge or brush, while others use water instead of shampoo.
Also Read: How to Make Your Entrance Mat Look New Again